Friday, July 5, 2013

Remove Nicotine Stains From Plastic

Nicotine stains derive from tobacco.


Nicotine stains coat painted walls, linoleum, vinyl and plastic objects after repeated exposure to smoke and over time. These stains can be brown, oily, grimy and adhere to plastic often with a build up of accumulated dust. According to the State of Michigan's fact sheet for citizens, "Nicotine is a toxic substance found in the tobacco plant. The commercial preparation of the plant involves drying the leaves for the production of chewing tobacco, cigars, cigarettes and snuff." Removing light or heavy nicotine stains from plastic requires diligence and a lot of scrubbing, but removal is possible in most cases.


Instructions


1. Put the rubber gloves on your hands. Common dishwashing gloves work fine.


2. Fill the bucket half full with the hottest tap water available. Add one cup of baking soda and one cup of vinegar.


3. Spray the plastic with an all-purpose cleaner.


Spray the plastic coated with nicotine stains with an all-purpose cleaner and allow the cleaner to saturate the plastic for about five minutes.


4. Dip the scrub brush into the baking soda/vinegar/water solution and scrub the plastic vigorously. Repeat until residue or stains are removed. If stains/residue persist, continue scrubbing.


5. Change the bucket solution repeatedly as you clean, especially if you're dealing with a large amount of stained plastic. The water will become brown as the nicotine transfers from the plastic to the scrub brush and subsequently to the water. If the stain is very greasy, pour vinegar straight onto the stain, then scrub with the solution and scrub brush.


6. Use a toothbrush to scrub smoke off fine details.


Use a toothbrush to scrub any fine details in molded crevices on the plastic. Use the same cleaning solution, or liberally sprinkle baking soda onto a wet plastic surface and scrub the soda undiluted directly onto the stain. Rinse the plastic with a rag soaked in water.


7. Wet a rag in cold water and wipe down the plastic, rinsing away the cleaning solution. After rinsing, if you notice any residue/stains still in place, proceed to the final step.


8. Use an eraser sponge to further scrub the plastic. Eraser sponges, such as Mr. Clean's Magic Eraser and Scotch-Brite's Easy Erasing Pad, contain melamine foam, an effective stain remover, but the pads break up and dissolve very quickly. Use a wet rag to rinse away any residue left behind by the eraser sponge.



Related posts



    Smoking isn't good for your health or your home.If you've just moved into the former home of a smoker or someone in your family smokes, you've probably discovered the effects cigarette smoke can h...
    The nicotine in cigarette smoke causes stains on walls and windows.When you or someone else smokes indoors, nicotine stains will develop on your walls, windows and other surfaces. Not only does th...
    Cigarettes smoked in the home expose all surfaces to nicotine stains.Nicotine is a chemical found in cigarettes. When cigarettes are smoked inside the home, nicotine produces a brown stain that is...
    Cigarette smoke may create a yellow film on your windows.If you are a smoker, the nicotine may not only be affecting your body. Nicotine and tar are present in cigarette smoke -- these substances...
    Nicotine exhausted from cigarette smoke is known for leaving a smell that is unpleasant to many people, especially those who are no used to cigarette smoke. When smoking is done routinely in a hou...